How to Kill Nodemon Process After Running Mocha Tests?

Best Tools to Kill Nodemon Process to Buy in January 2026

1

Probe Data Repair Tool Test Debug Probe for Flying Lead OK Line PCB Jumper Wire

• VERSATILE TOOL FOR TESTING AND DATA REPAIR, ENHANCES EFFICIENCY.
• PRECISION STAINLESS STEEL NEEDLE ADAPTS TO ULTRA-THIN PADS EASILY.
• ADJUSTABLE FEATURES FOR CUSTOMIZABLE TESTING SCENARIOS AND RESULTS.

BUY & SAVE

$58.99

2

Klein Tools VDV500-820 Wire Tracer Tone Generator and Probe Kit Continuity Tester for Ethernet, Telephone, Speaker, Coax, Video, and Data Cables, RJ45, RJ11, RJ12

• PROFESSIONAL-GRADE PRECISION: ACCURATE TRACING FOR OPEN, NON-ENERGIZED WIRES.

• VERSATILE SIGNAL RANGE: 5 TONES TRANSMIT SIGNALS OVER 1,000 FEET RELIABLY.

• SECURE ATTACHMENTS: RUGGED CLIPS ENSURE STABLE CONNECTIONS DURING TRACING.

BUY & SAVE

$52.99 $99.98

Save 47%

3

innomaker LA5016 USB Logic Analyzer - 16 Channels 500MS/s 10GB Depth PWM Generator, MCU ARM FPGA Debug Tool, English Software, Support for Windows, macOS, Linux

• 16 CHANNELS WITH 500MS/S SPEED FOR REAL-TIME DEBUGGING POWER
• USER-FRIENDLY SETUP WITH INTUITIVE SOFTWARE AND HARDWARE COMBO
• SUPPORTS MULTIPLE PROTOCOLS FOR VERSATILE AND EFFICIENT ANALYSIS

BUY & SAVE

$299.00

4

Hands-On RTOS with Microcontrollers: Building real-time embedded systems using FreeRTOS, STM32 MCUs, and SEGGER debug tools

BUY & SAVE

$27.00 $59.99

Save 55%

5

Jonard Tools EX-2 DIP/IC Extraction Tool for Mircochips with 24-40 Pin

• SPECIALLY DESIGNED FOR 24-40 PIN DIP SOCKETS AND DEVICES.
• BUILT-IN GROUNDING LUG ENSURES SAFE USE AND PREVENTS DAMAGE.
• UNIQUE HOOKS SECURELY GRASP CHIPS WITHOUT CAUSING HARM.

BUY & SAVE

$28.95

6

InnoMaker USB Logic Analyzer LA5032 32 Channels 500MHz 10G Samples for MCU ARM FPGA Debug Tool MIPI Analyzer with English Software Compatible with Windows Mac Linux

• CAPTURE COMPLEX SIGNALS WITH 32 CHANNELS AT 500MHZ SAMPLING RATE.

• 10G SAMPLE DEPTH PER CHANNEL ENSURES NO CRITICAL DATA IS MISSED.

• INSTANTLY DECODE 20+ PROTOCOLS TO SPEED UP YOUR DEBUGGING WORKFLOW.

BUY & SAVE

$499.00

+

ONE MORE?

To kill the nodemon process after running mocha tests, you can use the following steps:

1. Open the terminal window where you are running the nodemon process.
2. Use the command "Ctrl + C" to stop the nodemon process.
3. If the nodemon process is still running after using "Ctrl + C", you can use the command "ps aux | grep nodemon" to find the process ID (PID) of the nodemon process.
4. Once you have the PID of the nodemon process, use the command "kill -9 " to forcefully kill the process.

By following these steps, you can successfully kill the nodemon process after running the mocha tests.

How to confirm nodemon process has been successfully stopped after running tests in mocha?

To confirm that the nodemon process has been successfully stopped after running tests in mocha, you can follow these steps:

1. After running your tests in mocha, check the terminal/command prompt window where you started nodemon. You should see a message indicating that nodemon has been stopped or terminated.
2. You can also try accessing the URL or service that nodemon was running. If nodemon has stopped successfully, you should not be able to access the service anymore.
3. Alternatively, you can also check the currently running processes on your system to see if nodemon is still running. On Unix-based systems, you can use the ps command to list all processes, and on Windows, you can use the tasklist command.

By following these steps, you can confirm that the nodemon process has been successfully stopped after running tests in mocha.

How to manually stop nodemon process in the terminal window?

To manually stop the nodemon process in the terminal window, you can use any of the following methods:

1. Press Ctrl + C: This is the most common method to stop a running process in the terminal. Pressing Ctrl + C will send a SIGINT signal to the nodemon process, causing it to stop.
2. Use kill command: First, you need to find the process ID (PID) of the nodemon process by using the ps command. Once you have the PID, you can use the kill command followed by the PID to stop the process. For example:

ps aux | grep nodemon kill PID

1. Use pkill command: You can also use the pkill command to stop the nodemon process by its name. For example:

pkill nodemon

How can I kill nodemon process without closing the terminal window?

You can kill the nodemon process without closing the terminal window by using the following steps:

1. Find the process ID (PID) of the nodemon process by running the following command in the terminal:

ps aux | grep nodemon

1. Look for the nodemon process in the list of results and note down the PID associated with it.
2. Use the following command to kill the nodemon process using the PID:

kill

Replace <PID> with the actual process ID of the nodemon process.

After running this command, the nodemon process should be terminated without closing the terminal window.

What is the quickest method to kill nodemon after mocha test run?

You can kill nodemon quickly after running a mocha test by pressing Ctrl+C in the terminal where nodemon is running. This will send a SIGINT signal to nodemon and stop the process immediately.

What command should I input to end nodemon process following mocha test completion?

You can end the nodemon process following mocha test completion by pressing Ctrl + C in the terminal window where nodemon is running. This will send a SIGINT signal to nodemon and stop the process.

How do I force terminate nodemon process in the terminal?

To force terminate a nodemon process in the terminal, you can use the following steps:

1. First, find the process ID (PID) of the nodemon process by running the command:

pgrep -f nodemon

1. Once you have the PID, you can force terminate the process by running the command:

kill -9

Replace <PID> with the actual process ID of the nodemon process. This will forcefully terminate the nodemon process.